Payment & Shipping Terms:
|Material:||Ex Cold Rolled Coil, Galvanized Coil||Thickness:||0.8-1.5 Mm Thickness|
|Feeding Width:||1250 Mm||Material Tension:||G300-350|
|Main Motor:||11 KW X 2||Diameter Of Shaft:||ф75 / ф95mm|
|Cutting Type:||Hydraulic Cutting Device||Control System:||PLC Control System|
|Hydraulic Motor:||5.5Kw||Roller Material:||45# Steel, Hard Chrome Coated|
|Cutting Blade Material:||Cr12||Name:||Steel Metal Decking Floor Roll Forming Machine|
|Forming Station:||24||Forming Speed:||7-15m/min|
metal deck roll forming machine,
metal roofing roll former,
Galvanized Coil Floor Deck Forming Machine
Steel Metal Decking Floor Roll Forming Machine China Factory Price
Steel Metal deck floor roll forming machine also can be called galvanized decking floor forming machine, combined floor deck roll forming machine, steel decking roll forming machine and steel floor deck roll forming machine.
This type of deck floor panel thickness normally is 0.8-1.2mm, it works together with concrete material as combined floor deck.
The deck floor produced by steel metal deck floor roll forming machine is used for floor decking in building.
Normally, the raw material for decking floor is glazed galvanized sheet, due to it is beautiful enough, we needn’t decorate the ceiling again if you choose this type of deck floor. This series floor deck is suitable for steel structure factory and public big building.
|5Tons Manual Deocoiler||Coil Inner-diameter=510±30mm. Coil Outer-diameter Max. 1300mm；|
|Taper wedge expanding system|
|Load Capacity: Max. 5 Tons; Coil Width Max. 1250mm；|
|Steel Metal Deck Floor Roll Forming Machine||Gear/Sprocket driving; 24stations roll forming|
|Rollers manufactured from 45# steel, CNC lathes, hard Chrome Coated, fine polished.|
|Shafts Diameter=ф75/ф95mm, Precision Machined, fine Polished|
|Main motor =11*2KW, Frequency speed control|
|Max Line speed of roll Former: Approx. 7-15m/min|
|Hydraulic Cutting Device||Stop to cut, Post cut|
|Cutting tool material: Cr12, Heat treatment|
|Hydraulic unit, Pump motor =5.5KW|
|PLC Control System||Control the quantity & cutting length automatically|
|Combined with: PLC (Delta), Touch Screen (Delta), Encoder (Omron), etc|
|24V Control voltage|
|Controller with forward/backward/emergency stop buttons|
|Product Rack||Un-powered, 3 units|
• Feeding with guider
• Roll forming machine
• Hydraulic cutting device
• Product rack ( Stacker option)
• PLC control system
Roll Former pictures:
Whole Steel Metal Decking Floor Roll Forming Machine with hydraulic system for cutting decking floor off, three pieces cutting blades cut, slug cut.
Rollforming rollers with fine lathing and polishing, coated with hard chrome.
Contact Person: Jamie
Tel: +86 13799275314