|
Product Details:
Payment & Shipping Terms:
|
| After-sales Service Provided: | Video Technical Support Or Oversea Engineer After Covid | Condition: | New |
|---|---|---|---|
| Tile Type: | Colored Glaze Steel For Wall Panel | Cutting Blade Material: | Cr12 With Quenched Treatment |
| Warranty: | 12 Months Or Customizable With Extra Charge | Raw Material: | PPGI PPGL GI GL |
| Roller Material: | 45# Forged Steel | Thickness: | 0.3-0.7mm |
| High Light: | 0.7mm Wall Panel Roll Forming Machine,380V Wall Panel Roll Forming Machine,CR12 Blade Wall Panel Roll Former |
||
Double Level Wall Panel Roll Forming Machine YX5-70.5-1128 YX12-218-1090
If customization:Yes
Series:Dual level roll forming machine
Type:YX5/YX12 wall profiles
Brand:Bogong
Profile drawing:
Upper level:
Bottom level:
Technical Parameters
The main technical parameters are for your inference only.
Only if you provide the profile required or the real objects of sectional materials, and we will offer the accurate parameters.
Attention:
The two levels can't be run at the same time
Manual Clutch to switch the driven system
The two profiles share one un-coiler/ base frame/ main motor for roll former/ hydraulic cutting carriage/PLC control system.
| (1) 5Tons un-coiler | |
| Description | Manual or Hydraulic, With or without coil car |
| (2) Manual Pre-shearing device | |
| Function | un-powered Dual Leveling Smart cut control, to cut off the end of the final piece of sheet only |
| Shearing Thickness | Up to Max. 0.8mm (if thickness > 0.8mm, then hydraulic pre-shearing device or electric pre-shearing device instead ) |
| (3) The general machine parameter | |
| Suitable roll forming material | Color steel sheet or galvanized steel sheet |
| Thickness | 0.4mm-0.7mm |
| Feeding width | 1200mm |
| Frame design | Q235 Wall plate design / Torri pillar design |
| Upper Roll stages | 15 stages |
| Lower Roll stages | 16 stages |
| Material of forming roller | 45# steel with forge treatment, CNC lathes, Hard Chrome Coated |
| Shafts Diameter | Φ75mm |
| Main motor power | 5.5KW with reducer |
| Max. Line speed of roll former | about 15m/min (Higher speed is available, depends on the specification required by the buyer) |
| Hydraulic group power | 3KW |
| Material of cutting blade | Cr12, heat treatment |
| Electric Standard | 380V /50Hz/3PH or as the customer's requirements |
| Major Color of Machine Painted | RAL 5015 (Blue) or as per customer's requirements |
| (4) PLC Control system | |
| PLC | Delta brand or customizable |
| Touch Screen | Weinview brand or customizable |
| Inverter | Delta brand or customizable |
| Encoder | Omron brand |
| (5) Product rack | |
| Description | un-powered, 3 units |
Option:
|
|
| 7. About us | |
| Please visit the web site: www.customrollformingmachine.com for detailed information | |
Contact Person: Jamie
Tel: +86 13799275314
| Factory Address:No. 788-5D, Jimei North Avenue, Jimei District, Xiamen, China | |
| Sales office:No. 788-5D, Jimei North Avenue, Jimei District, Xiamen, China | |
| +86-137-99275314 | |
| export@bogongmachinery.com | |
