|
Product Details:
Payment & Shipping Terms:
|
| Power Supply: | 380V/50HZ/3ph | Material Width: | 0.8-1.2mm |
|---|---|---|---|
| Effective Width: | 200-530mm | Suit For Material: | PPGI, Alumnium Zinc, Aluminum Sheet, Copper Sheet |
| Forming Station: | 8 | Shaft Diameter: | 65mm |
| Forming Speed: | 12-15m/min | Driving Motor: | 2.2KW |
| Hydraulic Motor: | 2.2KW | Painting Color: | Blue+yellow |
| Machine Size: | 1800*1300*1100mm | Weight: | 1500KGS |
| Name: | Portable Standing Seam Machine, Standing Seam Roof Panel Curving Machine | ||
| High Light: | standing seam roll former,standing seam roofing machine |
||
Portable Standing Seam Machine, Standing Seam Roof Panel Curving Machine
Design Drawing For Reference
Standing Seam Roof Machine Parameters
| Main Roll Forming Machine | |
| Transmitted by chain | |
| Stepless type change between 200mm and 530mm effetive width | |
| Gear/ sprocket driving: 8 steps to form | |
| Shafts Diameter=ф65mm, Precision Machined | |
| Rollers manufactured from 45 # steel, CNC lathes, hard Chrome Coated | |
| Main motor =2.2KW, Frequency speed control | |
| Forming Speed: 8-15m/min |
| Hydraulic Cutting Device | |
| Main hydraulic parts are Beijing Huade brand | |
| Pump motor =2.2KW; Cutting pressure=Max.8-15Mpa | |
| Cutting tool material: Cr12MoV, Heat treatment | |
| PLC Control System | |
| Control the cutting length & quantity automatically | |
| Combined with:PLC(detal, Taiwan), inverter(Delta Taiwan), Touch Screen (delta, Taiwan), Encoder (Omron), etc | |
| Cut-to-length tolerance≤±2 mm | |
| Control voltage 24V |
Standing Seam Roof Panel Machine Advantage
1. Whole standing seam roof panel machine is small and portable, can be installed in one 20 feet container and take the machine to any place to produce;
2. Can be designed as stepless type between 200mm and 530mm width, automatic type changed;
3. With portable electric controller to manual start or stop the roll forming machine, no need operate all the works on PLC control screen;
4. it is only 1800kgs weight total, the project manager can lift this portble standing seam roof panel machine and make it work on roof top, can save carrying roof panel cost.
5. Whole standing seam roof panel machine can roll forming kinds of raw material, such as aluminum sheet, copper sheet, aluminum-zinc sheet and PPGI.
Standing Seam Roof Panel Curving Machine Parameter
| Gear driving: 3 steps to form | |
| Available bending width: 300-610mm; | |
| Min. bending radius for aluminum sheet and copper sheet:6m; Min. bending radius for painted steel: 8m | |
| Rollers manufactured from Cr12, hard Chrome Coated | |
| Driving motor =1.5KW | |
| Gear transport driving | |
| Forming Speed: 0-12m/min | |
| Bending radius set: hand wheel with radius value display |
This standing seam roof panel curving machine is manual adjustable for each width of standing seam roof panel from 200mm width to 530mm width, the thickness can be 0.8-1.2mm. The Min. bending radius for aluminum sheet and copper sheet:6m; Min. bending radius for painted steel: 8m, the bending radius can be set by hand wheel with radius value display.
Standing Seam Roof Sample
welcome contact with us for more information about any roll forming machine you need!
Contact Person: Jamie
Tel: +86 13799275314
Fax: 86-592-6385166
| Factory Address:No. 788-5D, Jimei North Avenue, Jimei District, Xiamen, China | |
| Sales office:No. 788-5D, Jimei North Avenue, Jimei District, Xiamen, China | |
| +86-137-99275314 | |
| export@bogongmachinery.com | |
