|
Product Details:
Payment & Shipping Terms:
|
| Power Supply: | 380V/50HZ/3ph | Material Width: | 0.7-1.0mm |
|---|---|---|---|
| Effective Width: | 416mm | Suit For Material: | GI, PPGI, Aluminum Sheet |
| Forming Station: | 14 | Shaft Diameter: | 75mm |
| Forming Speed: | 12-15m/min | Driving Motor: | 4KW*2 |
| Hydraulic Motor: | 4KW | Painting Color: | Blue+Orange |
| Machine Size: | 5500*850*1100mm | Weight: | 2500KGS |
| Name: | Supply Metal Stand Seam Roof Forming Machine With Roof Bending Machine | ||
| High Light: | standing seam roofing machine,standing seam metal roof machine |
||
Supply Metal Stand Seam Roof Forming Machine With Roof Bending Machine
Standing Seam Roof Design
Above design is suitable for:
a. aluminum 3004 coil: working thickness: 0.7mm-1.0mm, 0.93mm thickness is for inspection, common use, Tensile strength: 220Mpa, Yield strength: 210Mpa;
b. Pre-painted coil: Job thickness: 0.5mm-0.9mm, 0.5mm thickness is for inspection,common use, Grade: ASTM A653M CSB Z180
Main Parameter
| Parameter | Specification |
| Voltage | 380V/50HZ/3PH |
| Driving Motor | 4KW*2 |
| Hydraulic Motor | 4KW |
| Working Speed | 15-18m/min |
| Roofing Height | 65mm |
| Effective Width | 416mm |
| Material Width | 305-610mm |
| Thickness for Steel | 0.7-1.0mm |
| Tolerance for Cutting | ±2mm |
| Tolerance for Roof Width | ±5mm |
| Shaft Diameter | 75mm |
| Shaft Material | High grade 45# forged steel |
| Roller Material | Gr15 steel with polished and heat treatment, |
| 45# forged steel coated by chrome | |
| Sprocket Wheel | 45 steel high-frequencies quench |
| Cut-off System | Hydraulic cutting device |
| Cutting Blade Material | Cr12 steel |
| Machine Frame Material | Fine welded structural steel; |
| Roofing Material | PPGI, GI steel G330-550 |
| Painted Color | Blue+Orange Or Customization |
| Overall Size | 5500*880*1100mm |
| Weight | 2500KGS |
Manual Type Chnage Instruction
This Metal Stand Seam Roof Forming Machine With Roof Bending Machine both can roll forming straighten standing seam roof and tapered standing seam roof. The roof middle width can be changed by changing sveral Roller Spacers.
The type change steps is as below:
Remove cutting blades first, change the pre-machined Spacers according instruction manually, which are designed to allow for tapered or straight panels to be formed; Then feed the tapered flat sheet from one side of roll former to form this side’s shape, after run out, take it back to the feeding place, feed the panel from another side to run to the end to form the tapered pane.
Contact Person: Jamie
Tel: +86 13799275314
Fax: 86-592-6385166
| Factory Address:No. 788-5D, Jimei North Avenue, Jimei District, Xiamen, China | |
| Sales office:No. 788-5D, Jimei North Avenue, Jimei District, Xiamen, China | |
| +86-137-99275314 | |
| export@bogongmachinery.com | |
