|
Product Details:
Payment & Shipping Terms:
|
| Suit For Material: | Galvanized Steel, Zinc Coated Steel | Material Thickness: | 1.0-1.5mm |
|---|---|---|---|
| Material Width: | 217mm | Effective Width: | 65mm |
| Formation Station: | 20 Steps | Driving Motor: | 11KW*2 |
| Shaft Diameter: | 75mm | Forming Speed: | 10-15m/min |
| Cutting Type: | Stop Cutting | Cutting Motor: | 7.5KW |
| Control System: | PLC Control Cutting Length, Cutting Piece Etc | PLC Brand: | Siemens, Delta Or Mitsubishi |
| Size: | 13500*110*1450mm | Weight: | 10000mm |
| Name: | Galvanized Sheet Door Guider Roll Forming Machine China Manufacture | ||
| High Light: | steel sheet roll forming machine,cold roll forming machine |
||
Galvanized Sheet Door Guider Roll Forming Machine China Manufacture
Technical Process
Uncoiler---Feeding---Leveling----Roll Forming---Hydraulic Stop Cutting---Products Collecting
Technical Prameter
| 5Tons Manual Deocoiler | Coil Inner-diameter=510±30mm. Coil Outer-diameter Max. 1300mm； | ||
| Taper wedge expanding system | |||
| Load Capacity: Max. 5Tons; Coil Width Max. 1250mm； | |||
| Galvanized Sheet Door Guider Roll Forming Machine China Manufacture | Gear/Sprocket driving; 20 stations roll forming | ||
| Rollers manufactured from GCr material, CNC lathes, hard Chrome Coated, fine polished. | |||
| Shafts Diameter=ф75mm, Precision Machined, fine Polished | |||
| Main motor =11KW*2, Frequency speed control | |||
| Max Line speed of roll Former: Approx. 10-15m/min | |||
| Hydraulic Cutting Device | Hydraulic following cut, Post cut | ||
| Cutting tool material: Cr12, Heat treatment | |||
| Hydraulic unit, Pump motor =7.5KW | |||
| PLC Control System | Control the quantity & cutting length automatically | ||
| Combined with: PLC (Simenz), Touch Screen (Simenz), Encoder (Omron), etc | |||
| Cut-to-length tolerance≤±2mm | |||
| 24V Control voltage | |||
| Controller with forward/backward/emergency stop buttons | |||
| Product Rack | Un-powered, 3 units | ||
Design drawing and sample
See below design for Galvanized Sheet Door Guider Roll Forming Machine China Manufacture:
More Details For This Galvanized sheet Door Guider Roll Forming Machine
1. Feeding Guider, two group steel plate clamp steel sheet device, it is good for collect the raw steel coil, won't jump up, good for feeding inside machines.
2. Another adujsting steel sheet head deivce, after running the door guider roll forming machine and feed material come out from straightening device, if worker find the material is not on the machine center line, we can adjust second feeding device to adjust material to left or right again.
3. This Galvanized Sheet Door Guider Roll Forming Machine can produce five U purlin sizes, U65*60, U65*90, U65*120, U65*150, U65*210. D-spacer type changing.
4. For two bigger sizes, we design one set Roller Group move up and down on vertical direction to solve straight problem. It is controlled by PLC control system automatically.
Contact Person: Jamie
Tel: +86 13799275314
| Factory Address:No. 788-5D, Jimei North Avenue, Jimei District, Xiamen, China | |
| Sales office:No. 788-5D, Jimei North Avenue, Jimei District, Xiamen, China | |
| +86-137-99275314 | |
| export@bogongmachinery.com | |
