|
Product Details:
Payment & Shipping Terms:
|
| Name: | Double Deck Roll Forming Machine, Trapezoidal Roof Double Deck Forming Machine | Material Thickness: | 0.8-1.5mm |
|---|---|---|---|
| Material Tension Grade: | 550MPa | Material Width: | 1220mm |
| Suitable Material: | Pre-painted Coil | Driving Motor: | 7.5KW |
| Forming Station: | 17,18 | Change Type: | Manual Clutch Change |
| Forming Rollers: | Made From 45# Steel, Hard Chrome Coated | Forming Speed: | 8-20m/min |
| Shaft Diameter: | 75mm | Cutting Tool Material: | Cr12 |
| Machine Size: | 8700*1650*1850mm | Weight: | 95000KGS |
| High Light: | double deck roll forming machine,wall panel roll forming machine |
||
Double Deck Roll Forming Machine, Trapezoidal Roof Double Deck Forming Machine
Description
One set Double Deck Roll Forming Machine, Trapezoidal Roof Double Deck Forming Machine normally has two layers or two levels of roll forming parts which gives it another name dual level roll forming machine, also two feeding tables and two sets cutting blades. And because this machine makes two shapes metal sheets, and double sheet roll forming machine is also a familiar name to people.
For our double deck roll forming machine design, the two layers of roll forming parts cannot work at the same time, there is clutch to change working layers. which means each one layer roll forming systems will be stopped when the other is working. The two layer or two levels roll forming parts share the same motor and same PLC constrol system.
Double Roll Forming Machine , Double Layer Machine , Double Layer Roll Forming Technical Parameter
| Machine Component | Specification | ||
| 5Tons Manual Deocoiler | Coil Inner-diameter=510±30mm. Coil Outer-diameter Max. 1300mm； | ||
| Taper wedge expanding system | |||
| Load Capacity: Max. 5 Tons; Coil Width Max. 1250mm； | |||
| Double Layer Roll Forming Machine | Gear/Sprocket driving; 17,18 stations forming, two layers | ||
| Rollers manufactured from 45# steel, CNC lathes, hard Chrome Coated, fine polished. | |||
| Shafts Diameter=ф75mm, Precision Machined, fine Polished | |||
| Main motor =7.5KW, Frequency speed control | |||
| Max Line speed of roll Former: Approx. 10-15m/min | |||
| Hydraulic Cutting Device | Stop to cut, Post cut, slug cut | ||
| Cutting tool material: Cr12, Heat treatment | |||
| Hydraulic unit, Pump motor =4KW | |||
| PLC Control System | Control the quantity & cutting length automatically | ||
| Combined with: PLC (Siemens), Touch Screen (Siemens), Encoder (Omron), etc | |||
| Cut-to-length tolerance≤±2mm | |||
| 24V Control voltage | |||
| Portable controller with forward/backward/emergency stop buttons | |||
| Product Rack | Un-powered, 3 units |
||
Profile Design
Steel Roof Sample Produced by Double Deck Roll Forming Machine
Contact Person: Jamie
Tel: +86 13799275314
| Factory Address:No. 788-5D, Jimei North Avenue, Jimei District, Xiamen, China | |
| Sales office:No. 788-5D, Jimei North Avenue, Jimei District, Xiamen, China | |
| +86-137-99275314 | |
| export@bogongmachinery.com | |
