Payment & Shipping Terms:
|Suit For Material:||Painting Steel, Galvanized Steel, PPGI||Material Thickness:||0.6-1.0mm|
|Material Width:||136mm||Effective Width:||76mm|
|Formation Station:||14 Steps||Driving Motor:||4KW|
|Shaft Diameter:||65mm||Forming Speed:||10-15m/min|
|Cutting Type:||Hydraulic Cutting||Cutting Motor:||3KW|
|Control System:||PLC Control Cutting Length, Cutting Piece Etc||PLC Brand:||Siemens, Delta Or Mitsubishi|
|Name:||Steel Sheet Rolling Shutter Door Roll Forming Machine With Slot Cutting|
shutter door forming machine,
rolling shutter making machine
Steel Sheet Rolling Shutter Door Roll Forming Machine With Slot Cutting
Design drawing and sample
See below design, Slats Steel Roller Shutter Door Roll Forming Machine / Shutter Door Machine design
Uncoiler---Feeding---Leveling----Roll Forming---Cutting---Products Collecting
|1.5Tons Manual Deocoiler||Coil Inner-diameter=510±30mm. Coil Outer-diameter Max. 1300mm；|
|Taper wedge expanding system|
|Load Capacity: Max. 1.5 Tons; Coil Width Max. 300mm；|
|Steel Sheet Rolling Shutter Door Roll Forming Machine||Gear/Sprocket driving; 14 stations roll forming|
|Rollers manufactured from 45# steel, CNC lathes, hard Chrome Coated, fine polished.|
|Shafts Diameter=ф65mm, Precision Machined, fine Polished|
|Main motor =4KW, Frequency speed control|
|Max Line speed of roll Former: Approx. 10-15m/min|
|Hydraulic Cutting Device||Stop to cut, Post cut|
|Cutting tool material: Cr12, Heat treatment|
|Hydraulic unit, Pump motor =3KW|
|PLC Control System||Control the quantity & cutting length automatically|
|Combined with: PLC (Delta), Touch Screen (Delta), Encoder (Omron), etc|
|24V Control voltage|
|Controller with forward/backward/emergency stop buttons|
|Product Rack||Un-powered, 3 units|
This Steel Sheet Rolling Shutter Door Roll Forming Machine With Slot Cutting has been designed to produce horizontal roller shutter door slats by galvanized or prepainted steel strips.
The roller shutter door is the door that jointed by many horizontal pieces shutter door panels together, door will be open and closed by rolling up or releaing down along roller shutter door guiders.
Compared to a traditional door, roller shutter door's difference are:
1. Door will be rolled up, not rotate, it save open door place;
2. Roller shutter can be easy to change shapes when be closed and open, the shutter door can be square or rectangular shapes;
In order to save more spaces and and make door open and close more conveniently, choose rolling shutter door is correct.The real rolling shutter doors have been produced by this Steel Sheet Rolling Shutter Door Roll Forming Machine can be with installation used slot (below has picture for reference) Roller shutter door has common steel rolling shutter door type and PU or PU or polyurethane foam insulated shutter slats as well for reducing noise.
Feeding guider For Rolling Shutter Door Machine
With this feeding guider ,the metal sheet is easy to go into roll forming machine, no block, it is good for keeping steel sheet flat before rolling forming.
1. The warranty of the Steel Roller Shutter Door Roll Forming Machine / Shutter Door Machine is one year after the client receives the machine. Within the one year, we will send the replacement parts to the client free of charge.
2. We offer technical support service in whole life of our machines.
3. We can send our technicians to install and train the workers in the clients' factories.
Contact Person: Jamie
Tel: +86 13799275314