|
Product Details:
Payment & Shipping Terms:
|
| Name: | 0.2mm PPGI Corrugated Roofing Sheet Roll Forming Machine Good Quality | Material Thickness: | 0.2-0.4mm |
|---|---|---|---|
| Material Width: | Approx. 760mm | Effective Width: | 750/825/1050mm |
| Suitable Material: | PPGI, Galvanized Steel, Pre-painted Steel | Forming Station: | 18 |
| Driving Motor: | 5.5Kw | Shaft Diameter: | 75mm |
| Forming Speed: | 10-15m/min | Roller Material: | 45 # Steel, CNC Lathes, Hard Chrome Coated |
| Pump Motor: | 3KW | Cut-to-length Tolerance: | ≤±2 Mm |
| Cutting Tool Material: | Cr12 | Machine Size: | 8600*1550*1650MM |
| Weight: | 6000KGS | ||
| High Light: | cold roll forming machine,sheet metal forming machine |
||
0.2mm PPGI Corrugated Roofing Sheet Roll Forming Machine Good Quality
Technical Parameter
| Machine Component | Specification | ||
| 5Tons Manual Deocoiler | Coil Inner-diameter=510±30mm. Coil Outer-diameter Max. 1300mm； | ||
| Taper wedge expanding system | |||
| Load Capacity: Max. 5 Tons; Coil Width Max. 1250mm； | |||
| Corrugation roof sheet roll forming machine | Gear/Sprocket driving; 18 stations roll forming | ||
| Rollers manufactured from 45# steel, CNC lathes, hard Chrome Coated, fine polished. | |||
| Shafts Diameter=ф75mm, Precision Machined, fine Polished | |||
| Main motor =5.5KW, Frequency speed control | |||
| Max Line speed of roll Former: Approx. 10-15m/min | |||
| Hydraulic Cutting Device | Stop to cut, Post cut | ||
| Cutting tool material: Cr12, Heat treatment | |||
| Hydraulic unit, Pump motor =3KW | |||
| PLC Control System | Control the quantity & cutting length automatically | ||
| Combined with: PLC (Delta), Touch Screen (Delta), Encoder (Omron), etc | |||
| Cut-to-length tolerance≤±2mm | |||
| 24V Control voltage | |||
| Controller with forward/backward/emergency stop buttons | |||
| Product Rack | Un-powered, 3 units | ||
Description
This PPGI Corrugated Roofing Sheet Roll Forming Machine is the special design for our abroad client, the raw material width is 760mm and smallest thickness is 0.15mm.
So thin PPGI material is hard for roll forming corrugated shapes, it will cause not smooth roof surface and wave sides problem. So many roll forming machine factory can not make this type of 0.2mm PPGI Corrugated Roofing Sheet Roll Forming Machine Good Quality machine well. But right now we can and can make ensure the corrugated roof will be good quality after produced by our corrugated roof sheet roll forming machine.
Generally speaking, one PPGI corrugated roofing sheet Roll Forming machine line includes the following components. A manual decoiler, a feeding table with guider, roll forming system, sprocket and chain transmission system, hydraulic system, PLC control system, one hydraulic cutter with oil pump and product rack. Hydraulic decoiler and auto stacker can be choose by users for their lines also.
Corrugated Roofing Sheet Sample
Cutting Section After Roll Forming
We design two pieces cutting blades cutting off the corrugated roof sheet, no waste material, and ensure the cutting end on roof is beautifull, no ribs on it. The corrugated roofing sheet length can be set on PLC control system, after testing first one or two pieces of roof length is correct, we can start to produce automatically.
Contact Person: Jamie
Tel: +86 13799275314
Fax: 86-592-6385166
| Factory Address:No. 788-5D, Jimei North Avenue, Jimei District, Xiamen, China | |
| Sales office:No. 788-5D, Jimei North Avenue, Jimei District, Xiamen, China | |
| +86-137-99275314 | |
| export@bogongmachinery.com | |
