|
Product Details:
Payment & Shipping Terms:
|
| Name: | Pre-painted / Galvanized Steel Corrugation Roof Sheet Roll Forming Machine | Material Thickness: | 0.2-0.35mm |
|---|---|---|---|
| Material Width: | Approx. 914/ 1000/1250mm | Effective Width: | 750/825/1050mm |
| Suitable Material: | Galvanized Steel, Pre-painted Steel | Forming Station: | 18 |
| Driving Motor: | 7.5Kw | Shaft Diameter: | 75mm |
| Forming Speed: | 8-15m/min | Roller Material: | 45 # Steel, CNC Lathes, Hard Chrome Coated |
| Pump Motor: | 3KW | Cut-to-length Tolerance: | ≤±2 Mm |
| Cutting Tool Material: | Cr12 | Machine Size: | 9000*1550*1650MM |
| Weight: | 7000KGS | ||
| High Light: | metal roof roll forming machine,corrugated roof roll forming machine,Prepainted Steel Corrugation Roof Roll Former |
||
Pre-painted / Galvanized Steel Corruation Roof Sheet Roll Forming Machine
Introduction Of Corrugation Roof Roll Forming Machine
Corrugation roof sheet roll forming machine is the machine for roll forming steel or aluminum coil into waves shape, it is suitable for pre-painted coil, galvanized coil and aluminum coil.
This whole roll forming line consists of feeding unit, uncoiler, feeding guide, roll forming machine, cutter, automatic stacker, hydraulic system and electric control system.
When steel coil thickness is smaller than 0.3mm, due to steel coil performance, the corrugated roof is hard for roll forming into correct dimension, our Pre-painted / Galvanized Steel / Aluminum Corrugation Roof Sheet Roll Forming Machine is well solving this problem, our high level engineer team and technician team, we can manufacture the steel coil thickness under 0.2mm, welcome come to inspect!
Design Drawing
Technical Parameter
| Machine Component | Specification | ||
| 5Tons Manual Deocoiler | Coil Inner-diameter=510±30mm. Coil Outer-diameter Max. 1300mm； | ||
| Taper wedge expanding system | |||
| Load Capacity: Max. 5 Tons; Coil Width Max. 1250mm； | |||
| Corrugation roof sheet roll forming machine | Gear/Sprocket driving; 18 stations roll forming | ||
| Rollers manufactured from 45# steel, CNC lathes, hard Chrome Coated, fine polished. | |||
| Shafts Diameter=ф75mm, Precision Machined, fine Polished | |||
| Main motor =7.5KW, Frequency speed control | |||
| Max Line speed of roll Former: Approx. 10-15m/min | |||
| Hydraulic Cutting Device | Stop to cut, Post cut | ||
| Cutting tool material: Cr12, Heat treatment | |||
| Hydraulic unit, Pump motor =3KW | |||
| PLC Control System | Control the quantity & cutting length automatically | ||
| Combined with: PLC (Delta), Touch Screen (Delta), Encoder (Omron), etc | |||
| Cut-to-length tolerance≤±2mm | |||
| 24V Control voltage | |||
| Controller with forward/backward/emergency stop buttons | |||
| Product Rack | Un-powered, 3 units | ||
Contact Person: Jamie
Tel: +86 13799275314
Fax: 86-592-6385166
| Factory Address:No. 788-5D, Jimei North Avenue, Jimei District, Xiamen, China | |
| Sales office:No. 788-5D, Jimei North Avenue, Jimei District, Xiamen, China | |
| +86-137-99275314 | |
| export@bogongmachinery.com | |
