Payment & Shipping Terms:
|Name:||Steel Roofing Batten Roll Forming Machine, Ceiling Batten Roll Forming Machine||Series Number:||KH7-54|
|Material Available:||Galvanized Steel, PPGI||Material Tension Grade:||550MPa|
|Strip Width:||Approx 121mm||Material Thickness:||0.4-0.7mm|
|Driving Motor:||5.5KW||Forming Station:||14|
|Shaft Diameter:||65mm||Cutting:||Slug Cutting|
keel making machine,
small sheet metal roller
Steel Roofing Batten Roll Forming Machine, Ceiling Batten Roll Forming Machine
|1.5Tons Manual Deocoiler||Coil Inner-diameter=510±30mm. Coil Outer-diameter Max. 1300mm；|
|Taper wedge expanding system|
|Load Capacity: Max. 1.2 Tons; Coil Width Max. 1250mm；|
|Roof Batten Roll Forming Machine||Gear/Sprocket driving; 14stations roll forming|
|Rollers manufactured from 45# steel, CNC lathes, hard Chrome Coated, fine polished.|
|Shafts Diameter=ф65mm, Precision Machined, fine Polished|
|Main motor =4KW, Frequency speed control|
|Max Line speed of roll Former: Approx. 10-15m/min|
|Hydraulic Cutting Device||Stop to cut, Post cut, slug cut|
|Cutting tool material: Cr12, Heat treatment|
|Hydraulic unit, Pump motor =3KW|
|PLC Control System||Control the quantity & cutting length automatically|
|Combined with: PLC (Siemens), Touch Screen (Siemens), Encoder (Omron), etc|
|24V Control voltage|
|Portable controller with forward/backward/emergency stop buttons|
|Product Rack||Un-powered, 3 units|
Roll Forming Machine Description
The roll forming machine manufactures steel roofing and ceiling battens is well known as roof batten roll forming machine or ceiling batten roll forming machine.
Batten is with many meanings in construction area but generally it is a strip of solid material, historically made from wood but can also be made from plastic, metal, or fiberglass. In the steel industry, battens used as furring may also be referred to as top hats, in reference to the profile of the metal.
The steel battens is most popular used as roofing and ceiling. Steel foof and ceiling battens are light but strong. The aluminum zinc battens made from Steel Roofing Batten Roll Forming Machine, Ceiling Batten Roll Forming Machine are capable to remain straight and use in long life. The HAT shaped profile of the batten allows for ne sting, making them easier to store, carry and handle.
There are so many metal or steel batten systems available for construction and decoration used.
Choose steel roof and battens adavantage:
1. Can prevent plaster board be cracked when fixing the lining boards to timber directly;
2. To keep ceiling even no mater the timber is uneven.
3. Fixing of ceiling batten along with some clips will reduced impact of noise between the top and bottom floor in a residential house.
Roofing & Ceiling Batten Design Drawing
This steel roofing & ceiling batten raw material trip width is about 121mm and thickness is 0.4-0.7mm, user can choose bottom dot design and swaist ribs design is option for whole roll forming lines.
Contact Person: Jamie
Tel: +86 13799275314