Product Details:
Payment & Shipping Terms:
|
Name: | Steel Metal Roof Sheet Panel Double Layer Roll Forming Machine | Material Thickness: | 0.8-1.5mm |
---|---|---|---|
Material Tension Grade: | 550MPa | Material Width: | 1220mm |
Suitable Material: | Pre-painted Coil | Driving Motor: | 7.5KW |
Forming Station: | 17,18 | Change Type: | Manual Clutch Change |
Forming Rollers: | Made From 45# Steel, Hard Chrome Coated | Forming Speed: | 8-20m/min |
Shaft Diameter: | 75mm | Cutting Tool Material: | Cr12 |
Machine Size: | 8500*1650*1850mm | Weight: | 95000KGS |
High Light: | double deck roll forming machine,wall panel roll forming machine |
Steel Metal Roof Sheet Panel Double Layer Roll Forming Machine
Description
In order to save cost and layout place, some of user needs to produce two different metal sheets, cladding, trapezoidal, corrugated sheets or metal tiles, a Steel Metal Roof Sheet Panel Double Layer Roll Forming Machine can solve all problems.
Compared to a single layer roof panel roll forming machine, a Steel Metal Roof Sheet Panel Double Layer Roll Forming Machine is desgined to produce two different kinds of metal sheets which can be one trapezoidal roofing and one roof/wall cladding sheet; or one trapezoidal roofing sheet and one corrugated roofing sheet; or one trapezoidal sheet and one metal roof tile; or one corrugated sheet and one metal glazed roof tile etc.
To sum up, any two of the metal roof panels can be produced by this same double layer roll forming machine.
Double Roll Forming Machine , Double Layer Machine , Double Layer Roll Forming Technical Parameter
Machine Component | Specification | ||
5Tons Manual Deocoiler | Coil Inner-diameter=510±30mm. Coil Outer-diameter Max. 1300mm; | ||
Taper wedge expanding system | |||
Load Capacity: Max. 5 Tons; Coil Width Max. 1250mm; | |||
Double Layer Roll Forming Machine | Gear/Sprocket driving; 17,18 stations forming, two layers | ||
Rollers manufactured from 45# steel, CNC lathes, hard Chrome Coated, fine polished. | |||
Shafts Diameter=ф75mm, Precision Machined, fine Polished | |||
Main motor =7.5KW, Frequency speed control | |||
Max Line speed of roll Former: Approx. 10-15m/min | |||
Hydraulic Cutting Device | Stop to cut, Post cut, slug cut | ||
Cutting tool material: Cr12, Heat treatment | |||
Hydraulic unit, Pump motor =4KW | |||
PLC Control System | Control the quantity & cutting length automatically | ||
Combined with: PLC (Siemens), Touch Screen (Siemens), Encoder (Omron), etc | |||
Cut-to-length tolerance≤±2mm | |||
24V Control voltage | |||
Portable controller with forward/backward/emergency stop buttons | |||
Product Rack | Un-powered, 3 units |
Profile Design
Steel Roof Sample Produced by Double Layer Roll Forming Machine
We can see from this sample, whole roof surface is beautiful, straight on two sides, not any burr on cutting end.
Contact Person: Jamie
Tel: +86 13799275314