Payment & Shipping Terms:
|Name:||Steel Metal Roof Roll Forming Equipments Before PU Foaming Roll Forming||Material Thickness:||0.4-0.8mm|
|Material Width:||1219mm||Effective Width:||880mm|
|Suitable Material:||Pre-painted Steel||Forming Station:||30|
|Driving Motor:||11Kw||Shaft Diameter:||75mm|
|Forming Speed:||12-15m/min||Roller Material:||45 # Steel, CNC Lathes, Hard Chrome Coated|
|Pump Motor:||5.5KW||Cut-to-length Tolerance:||≤±2 Mm|
|Cutting Tool Material:||Cr12||Machine Size:||14000*1550*1550mm|
metal roof roll forming machine,
roofing sheet roll forming machine
Steel Metal Roof Roll Forming Equipments Before PU Foaming Roll Forming
Strictly speaking, this Steel Metal Roof Roll Forming Equipments Before PU Foaming Roll Forming is specially to traditional design. This is only a part of PU foaming heat insulation wall panel roll forming line. We roll forming the steel roof part at first, then the formed well roof goes into PU foaming section, after foaming the PU roof panel will be cut off together at the line end.
This roll forming machine prodcues metal sheets from 1219mm width and 04-0.8mm thickness. The tranmsission type is chain-sprocket; control system is Delta PLC with Omron encoder, cutter is hydraulic type, stop to cut.
The Steel Metal Roof Roll Forming Equipments Before PU Foaming Roll Forming is formed by 30 stations rollers, need about 40GP*1 +20GP*1 container to loading. There are also one uncoiler, one control cabinet, one hydraulic oil pump and three runout-tables in the container.
|5Tons Manual Deocoiler||Coil Inner-diameter=510±30mm. Coil Outer-diameter Max. 1300mm；|
|Taper wedge expanding system|
|Load Capacity: Max. 5 Tons; Coil Width Max. 1250mm；|
|Steel Roof panel roll forming machine||Gear/Sprocket driving; 30 stations roll forming|
|Rollers manufactured from 45# steel, CNC lathes, hard Chrome Coated, fine polished.|
|Shafts Diameter=ф75mm, Precision Machined, fine Polished|
|Main motor =11KW, Frequency speed control|
|Max Line speed of roll Former: Approx. 10-20m/min|
|Hydraulic Cutting Device||Stop to cut, Post cut|
|Cutting tool material: Cr12, Heat treatment|
|Hydraulic unit, Pump motor =5.5KW|
|PLC Control System||Control the quantity & cutting length automatically|
|Combined with: PLC (Delta), Touch Screen (Delta), Encoder (Omron), etc|
|24V Control voltage|
|Controller with forward/backward/emergency stop buttons|
|Product Rack||Un-powered, 3 units|
Steel Metal Roof Roll Forming Equipments Single Roof Picture for Reference
Two pieces of single roof joint together and whole surface is flat, this is before PU foaming only.
Steel Roof Sheet Product Application
1. A stylish and attractive design,giving the apperance of a traditional roof.
2. Good for heat insulation, noise insulation.
3. The raw material can be changed different color, elegant and noble looking. Before PU foaming, whole machine is the same manufacturing process as common used roof roll forming machine.
Contact Person: Jamie
Tel: +86 13799275314