Payment & Shipping Terms:
|Name:||Steel Metal Roof Panel Roll Forming Machine 0.3 - 0.6mm Material Thickness||Material Thickness:||0.3-0.6mm|
|Material Width:||1220mm||Effective Width:||980mm|
|Suitable Material:||Galvanized Steel, Pre-painted Steel, PPGI||Forming Station:||18|
|Driving Motor:||5.5Kw||Shaft Diameter:||75mm|
|Forming Speed:||10-15m/min||Roller Material:||45 # Steel, CNC Lathes, Hard Chrome Coated|
|Pump Motor:||3KW||Cut-to-length Tolerance:||≤±2 Mm|
|Cutting Tool Material:||Cr12||Machine Size:||8400*1300*1450mm|
metal roof roll forming machine,
roofing sheet roll forming machine
Steel Metal Roof Panel Roll Forming Machine 0.3 - 0.6mm Material Thickness
This Steel Metal Roof Panel Roll Forming Machine has been designed with entry bench for steel coil feeding, after the steel coil come out from decoiler, it will go inside feeding table from entry bench rollers, this is good for making steel material go into roll forming machines more smoothly.
Xiamen Bogong is the China manufacture that for Steel Metal Roof Panel Roll Forming Machine, all the forming rollers are CNC lathing and plated with 0.05mm hard chrome, it is for anti-rust and can keep roof surface no scrap.
The cutting frame was heat treatment for avoiding deformation as 60 degree hardness.
|5Tons Manual Deocoiler||Coil Inner-diameter=510±30mm. Coil Outer-diameter Max. 1300mm；|
|Taper wedge expanding system|
|Load Capacity: Max. 5 Tons; Coil Width Max. 1250mm；|
|Steel Metal Roof Panel Roll Forming Machine||Gear/Sprocket driving; 18 stations roll forming|
|Rollers manufactured from 45# steel, CNC lathes, hard Chrome Coated, fine polished.|
|Shafts Diameter=ф75mm, Precision Machined, fine Polished|
|Main motor =7.5KW, Frequency speed control|
|Max Line speed of roll Former: Approx. 10-12m/min|
|Hydraulic Cutting Device||Stop to cut, Post cut, two pieces cutting blades cutting|
|Cutting tool material: Cr12, Heat treatment|
|Hydraulic unit, Pump motor =3KW|
|PLC Control System||Control the quantity & cutting length automatically|
|Combined with: PLC (Delta), Touch Screen (Delta), Encoder (Omron), etc|
|24V Control voltage|
|Controller with forward/backward/emergency stop buttons|
|Product Rack||Un-powered, 3 units|
Entry bench before feeding table is for supporting the steel coil material, good for feeding material smoothly.
Safety Cover has been designed for roll forming machine position, the door should be closed when theSteel Metal Roof Panel Roll Forming Machine is working, it can be option choice for our roll forming lines.
Contact Person: Jamie
Tel: +86 13799275314