Payment & Shipping Terms:
|Power Supply:||380V/50HZ/3ph||Material Width:||0.4-0.8mm|
|Effective Width:||457mm||Suit For Material:||GI, PPGI, Color Steel Sheet|
|Forming Station:||20||Shaft Diameter:||75mm|
|Forming Speed:||12-15m/min||Driving Motor:||5.5KW|
|Hydraulic Motor:||3KW||Machine Frame Pillar:||50mm Diameter|
|Name:||Klip-lock Roof Panel Roll Forming Machine|
metal roof roll forming machine,
roofing sheet roll forming machine
Professional Klip-lock Roof Panel Roll Forming Machine, Klip-lock Roof Panel Making Machine
Quick Advantage Of This Klip-lock Roof Panel Roll Forming Machine
1. Standing pillar machine frame design, more stronger and beautiful;
2. Entry Bench type feeding table, good for solving material lock problem;
3. One set Klip-lock Roof Panel Roll Forming Machine can produce three sizes of roof panel;
4. Installed running indicator, when machine is running, the indicator is light, good for safe;
5. With safety cover for whole roll forming machine section, more safe for worker.
|5Tons Manual Deocoiler||Coil Inner-diameter=510±30mm. Coil Outer-diameter Max. 1300mm；|
|Taper wedge expanding system|
|Load Capacity: Max. 5 Tons; Coil Width Max. 600mm；|
|klip-lock roof panel roll forming machine||Gear/Sprocket driving; 20 stations roll forming|
|Rollers manufactured from 45# steel, CNC lathes, hard Chrome Coated, fine polished.|
|Shafts Diameter=ф75mm, Precision Machined, fine Polished|
|Main motor =5.5KW, Frequency speed control|
|Max Line speed of roll Former: Approx.10-20m/min|
|Hydraulic Cutting Device||Stop to cut, slug cutting|
|Cutting tool material: Cr12, Heat treatment|
|Hydraulic unit, Pump motor =3KW|
|PLC Control System||Control the quantity & cutting length, step tile length automatically|
|Combined with: PLC (Delta), Touch Screen (Delta), Encoder (Omron), etc|
|24V Control voltage|
|Controller with forward/backward/emergency stop buttons|
|Product Rack||Un-powered, 3 units|
Klip-lock Roof Design Drawing
Whatspp/wechat: 0086 15959271231
Details for Klip-lock Roof Panel Roll Forming Machine
1. This klip-lock roof panel roll forming machine can prodce three width PPGI material, 457.2mm effective width needs to roll forming reinforcing rib, the other two sizes need't this. We design the 18th stands adjusted by hand wheel to lift the step rollers up and down to reach this requirements. See below picture for reference.
2. At the cutting off end of klip-lock roof panel roll forming machine, we install indicator, when the steel ceiling roll forming machine is working, the indicator will be light, it is more safe for operator and can remind worker to switch off the power supply after be off duty.
3. Entry Bench has been designed for better feeding steel material, good for solute material blocked on feeding tableplace.
4. This klip-lock roof panel roll forming machine is with mesh safety cover, good for safety producing, when the machine is running, the mesh cover will be closed for anti dangerous.We can reference above pictures.
Contact Person: Jamie
Tel: +86 13799275314