Payment & Shipping Terms:
|Material Thickness:||1-2.5mm||Application:||Floor, Wall, Stairs|
|Forming Station:||19 Steps||Driving Motor:||22KW Servo Motor|
|Forming Speed:||32m/min||Punching Motor:||11KW With Cooling System|
|Cutting Motor:||5.5KW||Producing Line Dimension:||20000*1850*1900mm|
steel sheet roll forming machine,
sheet metal forming machine
1. This C/U/Sigma 140-300 framing machine is interchangeable, can produce all sizes between 140mm and 300mm C and U profile;
2. Forming Speed: 32m/min, very high speed;
3 . Whole line producing capacity: max 5-8ton/8hour;
4. With two groups rollers at roll forming machine finished end for straightening steel frame more straightly;
5. Whole machine frame thickness is 35mm, stronger enough for producing more thicker material.
If you need more information about our system, feel free to contact with me again.
Web:140-300mm, Flange: 50mm, Lip: 10-20mm
The punch hole showed on the photos are standard, we can custom design for user.
Standard Punching Option A
Standard Punching Option B
Our prefab light steel house framing machine choose pre-punch post-cut roll forming Chart, the steps as below:
De-coiler→ Leveling Device→ Punching Device→ Roll Forming System→Cutting Device →Out-let table
All punching dies are made from Cr12. Driven by hydraulic station. Holes parameter are able to set by PLC, Including Punching length and numbers.
Four leveling devices are used to fasten the raw material. When punching system is on working, the raw material will be fixed tightly by leveling device to ensure the job precision.
①height cut ②web dimple 13*17 mm ③service hole 165mm
④web board buckle ⑤flange dimple M6 ⑥ web service hole: 40*80mm
Rolling Forming System
Main motor type: 3 phase servo motor
Diameter of main shaft: ø75mm , Material of main shaft : 40Cr.
Material of frame: 45# steel
Frame Thickness: 35mm
Cutting material: Cr12 Cr12MoV Cr12(total three blades)
Hydraulic motor power: 5.5KW
Hydraulic Pressure: 16Mpa
Product support frame
6 meter Product support frame un power.
C stud to the stack platform.
Driven type: Hydraulic driven.
Safety Guard covers the whole machine to ensure worker’s safe.
Each parts of safety guard is linked with lock. Safety switch is available to stop machine when safety guard is open.
The computer system is able to read TXT format and connect with machine directly. It can control machine auto-running and demonstrate forming status dynamically, including punching and cutting. Also it is able to scan production data with the computer system.
Steel house Frame System Sample
For more information, pls contact: 0086 15959271231 (Wechat/Whatsapp number)
Contact Person: Jamie
Tel: +86 13799275314