Payment & Shipping Terms:
|Suit For Material:||Painting Steel, Galvanized Steel, PPGI||Material Thickness:||0.6-1.0mm|
|Material Width:||125mm||Effective Width:||115mm|
|Formation Station:||15 Steps||Driving Motor:||4KW|
|Shaft Diameter:||65mm||Forming Speed:||10-15m/min|
|Cutting Type:||Hydraulic Cutting||Cutting Motor:||3KW|
|Control System:||PLC Control Cutting Length, Cutting Piece Etc||PLC Brand:||Siemens, Delta Or Mitsubishi|
|Name:||Automatic Roller Shutter Door Roll Forming Machine China Manufacturer|
shutter door forming machine,
rolling shutter making machine
Automatic Roller Shutter Door Roll Forming Machine China Manufacturer
|1.5Tons Manual Deocoiler||Coil Inner-diameter=510±30mm. Coil Outer-diameter Max. 1300mm；|
|Taper wedge expanding system|
|Load Capacity: Max. 1.5 Tons; Coil Width Max. 300mm；|
|Cold Rolling Mills||Gear/Sprocket driving; 14 stations roll forming|
|Rollers manufactured from 45# steel, CNC lathes, hard Chrome Coated, fine polished.|
|Shafts Diameter=ф65mm, Precision Machined, fine Polished|
|Main motor =4KW, Frequency speed control|
|Max Line speed of roll Former: Approx. 10-15m/min|
|Hydraulic Cutting Device||Stop to cut, Post cut|
|Cutting tool material: Cr12, Heat treatment|
|Hydraulic unit, Pump motor =3KW|
|PLC Control System||Control the quantity & cutting length automatically|
|Combined with: PLC (Delta), Touch Screen (Delta), Encoder (Omron), etc|
|24V Control voltage|
|Controller with forward/backward/emergency stop buttons|
|Product Rack||Un-powered, 3 units|
Uncoiler---Feeding---Leveling----Roll Forming---Cutting---Products Collecting
This Automatic Roller Shutter Door Roll Forming Machine is designed by China Manufacturer Xiamen Bogong, two shutter door designs for one roller shutter door, See below design drawing, the YX14.5-115 with strengthen embossment is common design for shutter, the other one YX53-130 is the bottom piece for roller shutter door.
The bottom piece roller shutter door price is stronger and material thickness is bigger. Normally, the roller shutter door is controlled by electric motor, and has button or sensor to operate it go up or come down, it is convenient type of doors.
Compared to a traditional door, roller shutter door's difference are:
1. Door will be rolled up, not rotate, it save open door place;
2. Roller shutter can be easy to change shapes when be closed and open, the shutter door can be square or rectangular shapes;
See below design, Slats Steel Roller Shutter Door Roll Forming Machine / Shutter Door Machine design
More Sample Pictures
The whole sample is straight and beautiful surface, not any rib on cutting incision.
1. The warranty of the Steel Roller Shutter Door Roll Forming Machine / Shutter Door Machine is one year after the client receives the machine. Within the one year, we will send the replacement parts to the client free of charge.
2. We offer technical support service in whole life of our machines.
3. We can send our technicians to install and train the workers in the clients' factories.
Contact Person: Jamie
Tel: +86 13799275314