Payment & Shipping Terms:
|Suit For Material:||Painting Steel, Galvanized Steel, PPGI||Material Thickness:||0.6-1.0mm|
|Material Width:||121mm||Effective Width:||87mm|
|Formation Station:||14 Steps||Driving Motor:||4KW|
|Shaft Diameter:||65mm||Forming Speed:||10-15m/min|
|Cutting Type:||Hydraulic Cutting||Cutting Motor:||3KW|
|Control System:||PLC Control Cutting Length, Cutting Piece Etc||PLC Brand:||Siemens, Delta Or Mitsubishi|
|Name:||Hydraulic Cutting Roller Shutter Strip Door Making Machine / Door Forming Machine|
roller shutter door machine,
shutter door forming machine
Hydraulic Cutting Roller Shutter Strip Door Making Machine / Door Forming Machine
Hydraulic Cutting Roller Shutter Strip Door Making Machine / Door Forming Machine has much similar function as a steel rolling shutter door slat roll forming machine, and both roll forming machines have been designed for producing roller shutter doors.
The construction details for two types of roller shutter doors are different, too: one type of roller shutter consists of many horizontal rolling shutter slats, and the other is combined with three or four pieces of roller shutter door panels only (depends on the specific height of doors).
Normally, Steel roller shutter door slats made from hot/cold rolled steel strips,and hole punched,roll formed,and cut to length by the Hydraulic Cutting Roller Shutter Strip Door Making Machine / Door Forming Machine.
This Hydraulic Cutting Roller Shutter Strip Door Making Machine / Door Forming Machine middle place is flat design and at two sides are round joint design, it is hard for shutter door machine manufacturer to ensure whole shutter door strip is straight and joint place is enough to for clipping together, never fall down from other shutter door strip.
Kinds of Roller Shutter Door Designs
Uncoiler---Feeding---Leveling----Roll Forming---Cutting---Products Collecting
|1.5Tons Manual Deocoiler||Coil Inner-diameter=510±30mm. Coil Outer-diameter Max. 1300mm；|
|Taper wedge expanding system|
|Load Capacity: Max. 1.5 Tons; Coil Width Max. 1250mm；|
|Hydraulic Cutting Roller Shutter Strip Door Making Machine / Door Forming Machine||Gear/Sprocket driving; 14 stations roll forming|
|Rollers manufactured from 45# steel, CNC lathes, hard Chrome Coated, fine polished.|
|Shafts Diameter=ф65mm, Precision Machined, fine Polished|
|Main motor =4KW, Frequency speed control|
|Max Line speed of roll Former: Approx. 10-15m/min|
|Hydraulic Cutting Device||Stop to cut, Post cut|
|Cutting tool material: Cr12, Heat treatment|
|Hydraulic unit, Pump motor =3KW|
|PLC Control System||Control the quantity & cutting length automatically|
|Combined with: PLC (Delta), Touch Screen (Delta), Encoder (Omron), etc|
|24V Control voltage|
|Controller with forward/backward/emergency stop buttons|
|Product Rack||Un-powered, 3 units|
Shutter Door Machines
1. The warranty of the Steel Roller Shutter Door Roll Forming Machine / Shutter Door Machine is one year after the client receives the machine. Within the one year, we will send the replacement parts to the client free of charge.
2. We offer technical support service in whole life of our machines.
3. We can send our technicians to install and train the workers in the clients' factories.
Contact Person: Jamie
Tel: +86 13799275314