Payment & Shipping Terms:
|Name:||Metal Profile Roll Forming Machine, Custom Roll Forming Machine||Material Thickness:||0.4-1.0mm|
|Material Width:||1219mm||Effective Width:||880mm|
|Suitable Material:||Pre-painted Steel||Forming Station:||30|
|Driving Motor:||11Kw||Shaft Diameter:||75mm|
|Forming Speed:||12-15m/min||Roller Material:||45 # Steel, CNC Lathes, Hard Chrome Coated|
|Pump Motor:||5.5KW||Cut-to-length Tolerance:||≤±2 Mm|
|Cutting Tool Material:||Cr12||Machine Size:||14000*1550*1550mm|
steel sheet roll forming machine,
sheet metal forming machine
Metal Profile Roll Forming Machine, Custom Roll Forming Machine
Xiamen Bogong Machinery is a key company for design and manufacturing kinds of custom metal profile roll forming machines. There are themselves own design teams who are rich in reasearching difficult steel profile shapes, then skilled workers install and adjust the roll forming machines for producing out required correct steel profiles.
This custom metal profile roll forming machine prodcues metal sheets from 1219mm width and 0.4-1.0mm thickness. The tranmsission type is chain-sprocket; control system is Delta PLC with Omron encoder, cutter is hydraulic type, stop to cut.
This custom metal profile roll forming machine is formed by 30 stations rollers, need 40GP*1 +20GP*1 container to loading. There are also one uncoiler, one control cabinet, one hydraulic oil pump and three runout-tables in the container.
|5Tons Manual Deocoiler||Coil Inner-diameter=510±30mm. Coil Outer-diameter Max. 1300mm；|
|Taper wedge expanding system|
|Load Capacity: Max. 5 Tons; Coil Width Max. 1250mm；|
|Custom Metal Profile Roll Forming Machine||Gear/Sprocket driving; 30 stations roll forming|
|Rollers manufactured from 45# steel, CNC lathes, hard Chrome Coated, fine polished.|
|Shafts Diameter=ф75mm, Precision Machined, fine Polished|
|Main motor =11KW, Frequency speed control|
|Max Line speed of roll Former: Approx. 10-20m/min|
|Hydraulic Cutting Device||Stop to cut, Post cut|
|Cutting tool material: Cr12, Heat treatment|
|Hydraulic unit, Pump motor =5.5KW|
|PLC Control System||Control the quantity & cutting length automatically|
|Combined with: PLC (Delta), Touch Screen (Delta), Encoder (Omron), etc|
|24V Control voltage|
|Controller with forward/backward/emergency stop buttons|
|Product Rack||Un-powered, 3 units|
Metal Profile Roll Forming Machine, Custom Roll Forming Machine Sample for Reference
This metal profile is finished roll forming and come out from roll forming machines, it is flat and good smooth surface steel samples.
Metal Profile Usage
1. Can be steel buildings' roof and wall used;
2. Steel floor deck used;
3. Roller shutter door slat used;
4. Steel door frame used;
5. Water Steel Down Pipe used;
6. Solar project Rack and Guardral used and so on.
Contact Person: Jamie
Tel: +86 13799275314