Payment & Shipping Terms:
|Suit For Material:||Painting Steel, Galvanized Steel, PPGI||Material Thickness:||0.6-1.0mm|
|Material Width:||136mm||Effective Width:||76mm|
|Formation Station:||14 Steps||Driving Motor:||4KW|
|Shaft Diameter:||65mm||Forming Speed:||10-15m/min|
|Cutting Type:||Hydraulic Cutting||Cutting Motor:||3KW|
|Control System:||PLC Control Cutting Length, Cutting Piece Etc||PLC Brand:||Siemens, Delta Or Mitsubishi|
|Name:||Slats Steel Roller Shutter Door Roll Forming Machine / Shutter Door Machine|
roller shutter door machine,
rolling shutter making machine
Slats Steel Roller Shutter Door Roll Forming Machine / Shutter Door Machine
Steel roller shutter door slats made from hot/cold rolled steel strips,and hole punched,roll formed,and cut to length by the Slats Steel Roller Shutter Door Roll Forming Machine / Shutter Door Machine
Slats Steel Roller Shutter Door Roll Forming Machine / Shutter Door Machine has much similar function as a steel rolling shutter door slat roll forming machine, and both roll forming machines have been designed for producing roller shutter doors.
But, the specific products made by the two type roll forming machines are different: one is Roller Shutter Door Panels and the other is Roller Shutter Door Slats.
the construction details for two types of roller shutter doors are different, too: one type of roller shutter consists of many horizontal rolling shutter slats, and the other is combined with three or four pieces of roller shutter door panels only (depends on the specific height of doors).
The raw materials for two types of roll forming machines are different also : rolling shutter door slats are made from galvanized steel, prepainted steel or alloy aluminum steel strips, while roller shutter door panels are made out of pre-painted steel.
Uncoiler---Feeding---Leveling----Roll Forming---Cutting---Products Collecting
|1.5Tons Manual Deocoiler||Coil Inner-diameter=510±30mm. Coil Outer-diameter Max. 1300mm；|
|Taper wedge expanding system|
|Load Capacity: Max. 1.5 Tons; Coil Width Max. 1250mm；|
|Slats Steel Roller Shutter Door Roll Forming Machine||Gear/Sprocket driving; 14 stations roll forming|
|Rollers manufactured from 45# steel, CNC lathes, hard Chrome Coated, fine polished.|
|Shafts Diameter=ф65mm, Precision Machined, fine Polished|
|Main motor =4KW, Frequency speed control|
|Max Line speed of roll Former: Approx. 10-15m/min|
|Hydraulic Cutting Device||Stop to cut, Post cut|
|Cutting tool material: Cr12, Heat treatment|
|Hydraulic unit, Pump motor =3KW|
|PLC Control System||Control the quantity & cutting length automatically|
|Combined with: PLC (Delta), Touch Screen (Delta), Encoder (Omron), etc|
|24V Control voltage|
|Controller with forward/backward/emergency stop buttons|
|Product Rack||Un-powered, 3 units|
Design drawing and sample
See below design, Slats Steel Roller Shutter Door Roll Forming Machine / Shutter Door Machine design
Shutter Door Samples
Batches of Shutter Door Machines
1. The warranty of the Steel Roller Shutter Door Roll Forming Machine / Shutter Door Machine is one year after the client receives the machine. Within the one year, we will send the replacement parts to the client free of charge.
2. We offer technical support service in whole life of our machines.
3. We can send our technicians to install and train the workers in the clients' factories.
Contact Person: Jamie
Tel: +86 13799275314