Payment & Shipping Terms:
|Name:||Custom Roll Forming Machine For Light Steel Keel / Steel Keel Forming Machine||Material Available:||Galvanized Steel, PPGI, Aluminum Zinc Sheet|
|Material Tension Grade:||345MPa||Strip Width:||Approx 156mm|
|Material Thickness:||0.4-0.7mm||Driving Motor:||4KW|
|Forming Station:||12||Shaft Diameter:||65mm|
|Cutting:||Slug Cutting||Machine Size:||5800*620*1200mm|
keel making machine,
small sheet metal roller
Custom Roll Forming Machine For Light Steel Keel / Steel Keel Forming Machine
Roll Forming Machine Description
This Roll forming machine for light steel keel is manufactured based on the world’s top technology and experiences, and the Roll forming machine for light steel keel is equipped with high durability and convenient management.
Fabricated steel keel products are rigid without damage on the surface, and it is easy to install. In case that the equipment is mounted in a 40 ft container, it is available to manufacture products at construction sites, as it can be used as travelling equipment.
Roll forming machine for light steel keel consists of Un-coiler that inputs and releases coil, Roll Forming machines that forms shape through multi-stage forming roll, and cutting Unit that cuts and bends the fabricated roof panels. It is available to mount the equipment in a 40 ft container.
Un-coiler is a device that inputs steel coil to feed it stably to the equipment. Applying the portable system, the un-coiler becomes simple and compact to minimize the use of space.
Light Steel Keel hat Design Drawing
This keel hat raw material strip width is about 156mm and thickness is 0.3-0.8mm, the bottom dot and swaist ribs is the option designs for whole roll forming lines.
|Main Roll Forming Machine||Gear/Sprocket driving; 4 stations roll forming|
|Rollers manufactured from 45# steel, CNC lathes, hard Chrome Coated, fine polished.|
|Shafts Diameter=ф75mm, Precision Machined, fine Polished|
|Main motor =4KW, Frequency speed control|
|Max Line speed of roll Former: Approx. 7-15m/min|
|Hydraulic Cutting Device||Stop to cut, Post cut|
|Cutting tool material: Cr12, Heat treatment|
|Hydraulic unit, Pump motor =3KW|
|PLC Control System||Control the quantity & cutting length automatically|
|Combined with: PLC (Delta), Touch Screen (Delta), Encoder (Omron), etc|
|24V Control voltage|
|Product Rack||Un-powered, 3 units|
Hydraulic Cutting & Material Feeding Table
Daily maintenance plays an very importance role in extending the operation time and of light steel keel roll forming machine and the good quality finished steel keel panel. The following points should be part of the machine's daily production and usage routine.
Regularly lubricated the outside parts of the light steel keel roll forming machine, such as the driving chain
Regularly brush the surface of roller, particularly when working outside. If you do not use the light steel keel forming machine in a long time, you should apply luricating oil on the roller surface, make sure you clean it for next time running machine.
If the Roll Forming Machine For Light Steel Keel / Steel Keel Forming Machine is not operated in a long period, should cover it with plastic film, to avoid getting rain or dust on the machine, or avoid the machine becoming dampt, especially the PLC electric control board.
Make sure the cutting system is lubricated when necessary.
Check the Hydraulic station often and the oil quantity of the deceleration machines, add more oil if the oil level is low.
Check the electric appliances box and every leads conjuction circumstance of the light steel keel roll forming machine.
Contact Person: Jamie
Tel: +86 13799275314