Payment & Shipping Terms:
|Suit For Material:||Painting Steel, Galvanized Steel, PPGI||Material Thickness:||0.6-1.2mm|
|Formation Station:||14 Steps||Driving Motor:||4KW|
|Shaft Diameter:||65mm||Forming Speed:||10-15m/min|
|Cutting Type:||Hydraulic Cutting||Cutting Motor:||3KW|
|Control System:||PLC Control Cutting Length, Cutting Piece Etc||PLC Brand:||Siemens, Delta Or Mitsubishi|
|Name:||Alu-zinc Sheet Rolling Shutter Door Roll Forming Machine Factory Price|
roller shutter door machine,
shutter door forming machine
Alu-zinc Sheet Rolling Shutter door Roll Forming Machine Factory Price
Design drawing and sample
See below design, Alu-zinc Sheet Rolling Shutter door Roll Forming Machine Factory Price design
Uncoiler---Feeding---Leveling----Roll Forming---Cutting---Products Collecting
|1.5Tons Manual Deocoiler||Coil Inner-diameter=510±30mm. Coil Outer-diameter Max. 1300mm；|
|Taper wedge expanding system|
|Load Capacity: Max. 1.5 Tons; Coil Width Max. 300mm；|
|Cold Rolling Mills||Gear/Sprocket driving; 14 stations roll forming|
|Rollers manufactured from 45# steel, CNC lathes, hard Chrome Coated, fine polished.|
|Shafts Diameter=ф65mm, Precision Machined, fine Polished|
|Main motor =4KW, Frequency speed control|
|Max Line speed of roll Former: Approx. 10-15m/min|
|Hydraulic Cutting Device||Stop to cut, Post cut|
|Cutting tool material: Cr12, Heat treatment|
|Hydraulic unit, Pump motor =3KW|
|PLC Control System||Control the quantity & cutting length automatically|
|Combined with: PLC (Delta), Touch Screen (Delta), Encoder (Omron), etc|
|24V Control voltage|
|Controller with forward/backward/emergency stop buttons|
|Product Rack||Un-powered, 3 units|
This Steel Sheet Rolling Shutter Door Roll Forming Machine With Slot Cutting has been designed to produce horizontal roller shutter door slats by galvanized or prepainted steel strips.
China is one of the most popular country to use roller shutter doors, Our Alu-zinc Sheet Rolling Shutter door Roll Forming Machine has been designed and built according to market information needed.
This roll forming machine is technically capable to produce roller shutter pieces with any lengths available and effective widths customizable from aluminum zinc metal with thickness 0.6-1.2mm (some customers request heavy duty rolling shutter slats up to 2mm thickness).
Normally, one rolling shutter door or roller shutter door is a type door that consists of many horizontal small shutter door pieces together,the door opens and closes by raising up or lowering down along a rolling shutter door track or guide rails. Our Alu-zinc Sheet Rolling Shutter door Roll Forming Machine is designed according to that.
Xiamen Bogong Machinery is the China factory worked in roll forming machines area more than 15 years, we are in rich experience to ensure the roll forming machine performance, quality under competitve price. Competitve price for you, reliable quality for the roll forming machines!
Two pieces of shutter door pieces overlap well, for roller shutter door installation, the joint place is import, two pieces of shutter door slats must be jointed good, never disconnect, or it is dangerous the roller shutter door will fall down.
Contact Person: Jamie
Tel: +86 13799275314