Payment & Shipping Terms:
|Name:||Double Layers Corrugated Steel Panel Roll Forming Machine Custom Manufacture||Material Thickness:||0.4-0.8mm|
|Material Tension Grade:||550MPa||Material Width:||880/915mm|
|Suitable Material:||Pre-painted Coil, Aluminum-zinc||Driving Motor:||5.5KW|
|Forming Station:||16/17||Change Type:||Manual Clutch Change|
|Forming Rollers:||Made From 45# Steel, Hard Chrome Coated||Forming Speed:||30m/min|
|Shaft Diameter:||75mm||Cutting Tool Material:||Cr12|
double layer forming machine,
wall panel roll forming machine
Double Layers Corrugated Steel Panel Roll Forming Machine Custom Manufacture
This Double Layers Corrugated Steel Panel Roll Forming Machine Custom Manufacture has two working layers, each layers has their own feeding table, and each feeding table also has their own hand wheels for adjusting feeding width and manual pre-cutter. So each layers has alone working height, it is good for machine maintenance and adjustment.
The alone manual pre-shears for each roof panel layers also, one lay design is total separated from others.
See the pressing rollers upon the feeding table, it is used for pressing material head and tail off to keep whole plate sheet is more falt during the working layer is running.
Each roof design has its own cutting blades, all are hydraulic cutting but same hydraulic motor for each roof design. So in fact that this Double Layers Corrugated Steel Panel Roll Forming Machine Custom Manufacture's roof profile are separated roll forming rollers, separated cutting blades but only share the same PLC control system.
See the corrugated roof sheet sample produced by one layer of this double layers corrugated steel panel roll forming machine, the roof sheet shape can be customized design as user's requirements, so welcome to contact with us to custom roll forming machine for you.
|Forming Steps||16 steps for upper layer, 16 steps for middle layer, 17 steps for bottom layer|
|Thickness for Steel||0.4-0.6mm (Material:PPGI,GI Steel G550)|
|Shaft Material||High grade 45# forged steel|
|Roller Material||G45# steel, CNC lathe,polished and chrome plated|
|PLC Cabinet||Schneider, Delta|
|Sprocket Wheel||45 steel high-frequencies quench|
|Cut-off System||Post cutting, no waste cutting|
|Cutting Blade Material||Cr12 steel|
|Machine Frame Material||Fine welded structural steel;|
|Roofing Material||PPGI, GI steel G330-550|
|Painted Color||Blue+Orange Or Customization|
Contact Person: Jamie
Tel: +86 13799275314